Autel Autolink AL609 User Manual
Page 11
9
properly after diagnostic trouble codes are cleared.
Mode $08 – This special Control Mode requests control of the
on-board system, test, or component bi-directionally (where
applicable). The mode is manufacturer specific.
Mode $09 – Reports vehicle information. This information
includes vehicle VIN number and calibration information stored in
the vehicle ECUs.
Mode $0A – Request Emission-Related Diagnostic Trouble Codes
with Permanent Status. This mode is required for all
emissions-related DTCs. The presence of permanent DTCs at an
inspection without the MIL illuminated is an indication that a proper
repair was not verified by the on-board monitoring system.