Atec Rohde-Schwarz-ZVA Series - Manual (Page 9)

Version 10.00, May 2012
Rohde & Schwarz R&S ® ZVA Vector Network Analyzer 9
Sweep times of the R&S ® ZVA67
Sweep times depend on the number of measurement points, the measurement bandwidth, and the start and stop frequencies.
They include times for retrace and internal band switching and are valid with ALC and display switched off.
Number
of measurement points 51 101 201 401 801 1601
R&S ® ZVA67 with start frequency 6 GHz, stop frequency 12 GHz
For a measurement bandwidth of 100 kHz
With full one-port calibration or
with correction switched off
2 ms
3 ms
6 ms
11 ms
21 ms
42 ms
With TOSM calibration 4 ms 6 ms 12 ms 22 ms 42 ms 125 ms
For a measurement bandwidth of 1 MHz
With full one-port calibration or
with correction switched off
1.5 ms
2 ms
4 ms
7 ms
13 ms
25 ms
With TOSM calibration 3 ms 4 ms 8 ms 14 ms 26 ms 90 ms
R&S
® ZVA67 with start frequency 10 MHz and stop frequency 67 GHz
For a measurement bandwidth of 100 kHz
With full one-port calibration or
with correction switched off
3 ms
4 ms
7 ms
12 ms
22 ms
42 ms
With TOSM calibration 6 ms 8 ms 14 ms 24 ms 44 ms 125 ms
For a measurement bandwidth of 1 MHz
With full one-port calibration or
with correction switched off
2.5 ms
3 ms
5 ms
8 ms
14 ms
25 ms
With TOSM calibration 5 ms 6 ms 10 ms 16 ms 28 ms 90 ms