Atec Agilent-8480 Series - Manual (Page 8)

8
Options Available
Option 001: Supplies internal
rechargeable battery.
Option 002: Supplies parallel rear
panel sensor input(s). (Power
reference calibrator output on
front panel only.)
Option 003: Supplies parallel rear
panel sensor input(s) and moves
power reference calibrator output
to rear panel.
Option 004: Deletes the 11730A
sensor cable(s) provided. (Order the
desired cable listed in Accessories
Available section.)
Option 0B0: Deletes the manual set.
Option 908: Rackmount kit (capable
of holding one instrument).
Option 909: Rackmount kit (capable
of holding two instruments).
Option 915: Provides the service
manual.
Option 916: Provides an extra user’s
guide and programming guide.
Option A6J: Provides ANSI/NCSL
Z540-1-1994 certificate of calibration
with data.
Option OBV: Provides service
documentation to component level.
Accessories Available
Power Sensor Cables:
11730A: 1.5 meters (5 ft).
11730B: 3 meters (10 ft).
11730C: 6.1 meters (20 ft).
11730D: 15.2 meters (50 ft).
11730E: 30.5 meters (100 ft).
11730F: 61 meters (200 ft).
34131A: Hard transit case
34141A: Yellow soft carry/
operating case
34161A: Accessory pouch
34397A (Option OE3): 12Vdc to
115Vac (230Vac) inverter
E9287A: Spare battery 2
Complementary
Equipment
11683A Range Calibrator:
Verifies the accuracy and linearity of
the EPM series power meters. Outputs
corresponding to meter readings of 3,
10, 30, 100 and 300 µW and 1, 3, 10, 30
and 100 mW are provided. Calibration
uncertainty is ±0.25% on all ranges.
Warranty and Extended
Warranty
Included with each EPM series
power meter
3 is a standard three-year
return-to-Agilent Technologies service
warranty. The E-series and 8480 series
sensors have a one-year return-to-
Agilent Technologies service warranty.
Support options to extend warranty
or cover periodic calibrations are avail-
able. For more information, contact
your local sales and service office.
2. Only for EPM series power meters with Option
001 installed.
3. For option 001, the 3 year warranty does not apply
to the E9287A battery pack.