E-series e9300 average power sensor specifications – Atec Agilent-8480 Series User Manual
Page 11
E-series E9300 Average Power Sensor Specifications
The E-series E9300 wide dynamic range, average power sensors are designed for use with the EPM family of power meters.
These specifications are valid ONLY after proper calibration of the power meter and apply for CW signals unless otherwise
stated.
Specifications apply over the temperature range 0 ˚C to 55 ˚C unless otherwise stated, and specifications quoted over the
temperature range 25 ˚C ±10 ˚C, conform to the standard environmental test conditions as defined in TIA/EIA/ IS-97-A and
TIA/EIA/IS-98-A [1].
The E-series E9300 power sensors have two independent measurement paths (high and low power paths):
High Power Path: -10 to +20 dBm ("A" suffix sensors), +20 to +44 dBm ("B" suffix sensors) and 0 to
+30 dBm ("H" suffix sensors).
Low Power Path: -60 to -10 dBm ("A" suffix sensors), -30 to +20 dBm ("B" suffix sensors) and -50 to
0 dBm ("H" suffix sensors).
Some specifications are detailed for an individual measurement path.
Wide Dynamic Range (-60 to +20 dBm) Sensors
Table 9
Wide Dynamic Range (-30 to +44 dBm) Sensors
Model
Frequency Range
Maximum SWR
Maximum SWR
Maximum Power
Connector
(25 ˚C ± 10 ˚C)
(0 – 55 ˚C)
Type
E9300B
10 MHz – 18.0 GHz
10 MHz to 8 GHz: 1.12
10 MHz to 8 GHz: 1.14
0 – 35˚C: 30 W avg
Type-N (m)
8 to 12.4 GHz: 1.17
8 to 12.4 GHz: 1.18
35 – 55˚C: 25 W avg
12.4 to 18 GHz: 1.24
12.4 to 18 GHz: 1.25
<6 GHz: 500 W pk
>6 GHz: 125 W pk
500 W-
µ
S per pulse
E9301B
10 MHz – 6.0 GHz
10 MHz to 6 GHz: 1.12
10 MHz to 6 GHz: 1.14
0 – 35˚C: 30 W avg
Type-N (m)
35 – 55˚C: 25 W avg
<6 GHz: 500 W pk
500 W-
µ
S per pulse
Wide Dynamic Range (-50 to +30 dBm) Sensors
Model
Frequency Range
Maximum SWR
Maximum SWR
Maximum Power
Connector
(25 ˚C ± 10 ˚C)
(0 – 55 ˚C)
Type
E9300H
10 MHz – 18.0 GHz
10 MHz to 8 GHz: 1.15
10 MHz to 8 GHz: 1.17
3.16 W avg
Type-N (m)
8 to 12.4 GHz: 1.25
8 to 12.4 GHz: 1.26
100 W pk
12.4 to 18 GHz: 1.28
12.4 to 18 GHz: 1.29
100 W-
µ
S per pulse
E9301H
10 MHz – 6.0 GHz
10 MHz to 6 GHz: 1.15
10 MHz to 6 GHz: 1.17
3.16 W avg
Type-N (m)
100 W pk
100 W-
µ
S per pulse
11
10 MHz to 30 MHz: 1.21
30 MHz to 2 GHz: 1.15
2 GHz to 14 GHz: 1.20
14 GHz to 16 GHz: 1.23
16 GHz to 18 GHz: 1.27
10 MHz to 30 MHz: 1.21
30 MHz to 2 GHz: 1.15
2 GHz to 6 GHz: 1.20
9 kHz to 2 GHz: 1.15
2 GHz to 6 GHz: 1.20
10 MHz - 18.0 GHz
10 MHz - 6.0 GHz
9 kHz - 6.0 GHz
E9300A
E9301A
E9304A
10 MHz to 30 MHz: 1.15
30 MHz to 2 GHz: 1.13
2 GHz to 14 GHz: 1.19
14 GHz to 16 GHz: 1.22
16 GHz to 18 GHz: 1.26
10 MHz to 30 MHz: 1.15
30 MHz to 2 GHz: 1.13
2 GHz to 6 GHz: 1.19
9 kHz to 2 GHz: 1.13
2 GHz to 6 GHz: 1.19
+25 dBm average;
+33 dBm peak
(< 10 usec)
+25 dBm average;
+33 dBm peak
(< 10 usec)
+25 dBm average;
+33 dBm peak
(< 10 usec)
Type- N (m)
Type- N (m)
Type- N (m)
Connector
Type
Model
Frequency
Range
Maximum SWR
(25 ˚C ± 10 ˚C)
Maximum SWR
(0 – 55 ˚C )
Maximum
Power