beautypg.com

Battery option 001 operational characteristics, Environmental characteristics, General – Atec Agilent-8480 Series User Manual

Page 7: Remote programming, Safety, Accessories supplied

background image

7

1.

Characteristics describe product performance that is
useful in the application of the product, but is not
covered by the product warranty.

Battery Option 001
Operational
Characteristics

1

The following information describes
characteristic performance based at a
temperature of 25 °C unless otherwise
noted.

Typical operating time:

up to 3.5

hours with LED backlight on; up to 5.5
hours with LED backlight off (E4418B
power meter).

Charge time:

2 hours to charge fully

from an empty state; 50 minutes charg-
ing enables 1 hour of operation with
LED backlight on; 35 minutes charging
enables 1hr operation with LED back-
light off. Power meter is operational
whilst charging.

Service life:

(to 70% of initial

capacity at 25 °C): 450 charge/
discharge cycles

Chemistry:

Nickel Metal Hydride

Weight:

1kg

Environmental
Characteristics

General Conditions:

Complies with

the requirements of the EMC Directive
89/336/EEC. This includes Generic
Immunity Standard EN 50082-1: 1992
and Radiated Interference Standard
EN 55011: 1991/CISPR11:1990,
Group 1 - Class A.

Operating Environment

Temperature:

0 °C to 55 °C.

Maximum Humidity:

95% at 40 °C

(non-condensing).

Minimum Humidity:

15% at 40 °C

(non-condensing).

Maximum Altitude:

3000 meters

(9840 feet).

Storage Conditions

Storage Temperature:
–20 °C to +70 °C.

Non-operating Maximum Humidity:
90% at 65 °C (non-condensing).

Non-operating Maximum Altitude:
15240 meters (50000 feet).

General

Dimensions:

The following

dimensions exclude front and rear
protrusions.

212.6 mm W x 88.5 mm H x 348.3 mm D
(8.5 in x 3.5 in x 13.7 in)

Weight

Net:

E4418B: 4.0 kg (8.8 lb).

E4419B: 4.1 kg (9.0 lb).

Shipping:

E4418B:

7.9 kg (17.4 lb).

E4419B:

8.0 kg (17.6 lb).

Remote Programming

Interface:

GBIB interface operates

to IEEE 488.2. RS-232 and RS-422
serial interface supplied as standard.

Command Language:

SCPI standard

interface commands. 436A and 437B
code compatible (E4418B only); 438A
code compatible (E4419B only).

GPIB Compatibility:

SH1, AH1, T6,

TE0, L4, LE0, SR1, RL1, PP1, DC1,
DT1, C0.

Non-volatile Memory

Battery:

Lithium Polycarbon

Monoflouride, approximate lifetime
5 years at 25 °C.

Safety

Conforms to the following Product
Specifications:

EN61010-1:

1993/IEC 1010-1:

1990+A1/CSA C22.2 No. 1010-1: 1993
EN60825-1:

1994/IEC 825-1: 1993

Class 1 Low Voltage Directive
72/23/EEC

Accessories Supplied

Power Sensor Cable

11730A:

E4418B has one

1.5 meter (5 ft) sensor cable.
E4419B has two 1.5 meter (5 ft)
sensor cables.

Power cord:

One 2.4 meter

(7.5 ft) cable. Power plug matches
destination requirements.