Atec Agilent-E5071C - Manual (Page 39)

39
Cycle time for measurement completion 1, 2 (ms)
Table 38. Option 230/235/240/245/260/265/280/285/430/435/440/445/
460/465/480/485
Sweep mode: Swept, analyzer display turned off with: DISP:ENAB OFF,
number of traces = 1, system error correction: ON
Number of Points
51 201 401 1601
Start 1 GHz, stop 1.2 GHz, 500 kHz IF bandwidth
Uncorrected 3.5 5.5 8.0 24
2-port cal 6.4 9.8 15 49
4-port cal 13 20 29 108
Start 1 GHz, stop 1.2 GHz, 100 kHz IF bandwidth
Uncorrected 3.6 5.4 8.0 23
2-port cal 6.6 11 16 48
4-port cal 13 22 33 107
Start 1 GHz, stop 1.2 GHz, 1 kHz IF bandwidth
Uncorrected 54 202 397 1563
2-port cal 107 401 792 3125
4-port cal 213 800 1581 6247
Start 100 kHz, stop 3 GHz, 500 kHz IF bandwidth
Uncorrected 8.7 11 13 28
2-port cal 18 21 24 53
4-port cal 34 42 49 112
Start 100 kHz, stop 3 GHz, 100 kHz IF bandwidth
Uncorrected 8.8 11 13 28
2-port cal 17 22 25 57
4-port cal 34 42 50 122
Start 100 kHz, stop 3 GHz, 1 kHz IF bandwidth
Uncorrected 56 206 404 1583
2-port cal 112 410 805 3163
4-port cal 222 818 1608 6324
1. Supplemental performance data.
2. Measured with fi rmware version A.09.30.