Atec Agilent-E5071C - Manual (Page 15)

15
Test port output power 1
Table 12. Option 230/235/240/245/260/265/280/285/430/435/440/
445/460/465/480/485
Description Specifi cation Typical
Nominal power
(preset power)
0 dBm
Level accuracy 2, 6
(stepped sweep mode)
±0.650 dB (at 0 dBm,
50 MHz absolute)
±1.0 dB
Level accuracy 2
(swept sweep mode)
±2.5 dB
Level linearity 3, 5, 6
(stepped sweep mode)
9 kHz to 5 GHz
5 GHz to 6 GHz
6 GHz to 7 GHz
7 GHz to 8.5 GHz
±0.75 dB (–20 to 10 dBm)
±0.75 dB (–20 to 9 dBm )
±0.75 dB (–20 to 8 dBm )
±0.75 dB (–20 to 7 dBm )
Level linearity 5
(swept sweep mode) 4
9 kHz to 5 GHz
5 GHz to 6 GHz
6 GHz to 7 GHz
7 GHz to 8.5 GHz ±1.5 dB (at –20 to 10 dBm)
±1.5 dB (at –20 to 9 dBm)
±1.5 dB (at –20 to 8 dBm)
±1.5 dB (at –20 to 7 dBm)
Range 5, 6
9 kHz to 5 GHz
5 GHz to 6 GHz
6 GHz to 7 GHz
7 GHz to 8.5 GHz –55 to 10 dBm
–55 to 9 dBm
–55 to 8 dBm
–55 to 7 dBm
Sweep range 5, 6
9 kHz to 5 GHz
5 GHz to 6 GHz
6 GHz to 7 GHz
7 GHz to 8.5 GHz –55 to 10 dBm
–55 to 9 dBm
–55 to 8 dBm
–55 to 7 dBm
Level resolution 0.05 dB
Description Specifi cation SPD
Max leveled power 5, 6
(Option 230/235/240/245/260/
265/280/285)
9 kHz to 8.5 GHz
(Option 430/435/440/445/460/
465/480/485)
9 kHz to 6 GHz
6 GHz to 7 GHz
7 GHz to 8.5 GHz
10 dBm
10 dBm
9 dBm
8 dBm
1. Source output performance on port 1 only. Other port output performance is typical.
2. Level accuracy is taken at 0 dBm, relative to 50 MHz reference unless otherwise stated.
3. Level linearity given is relative to 0 dBm.
4. The specifi cation might not be met at 5 MHz or 50 MHz.
5. The level accuracy specifi cation needs to be taken into account for test port output power level.
6. Power calibration using an external power meter improves level accuracy of the test port output power.
Proper power meters/sensors, and the 82357B USB-GPIB interface are required to conduct power calibration.