Atec Agilent-E5071C - Manual (Page 21)

21
Test port input (trace noise)
Table 20. Option 230/235/240/245/260/265/280/285/430/435/440/
445/460/465/480/485
Description Specifi cation SPD
Trace noise magnitude 1
9 kHz to 30 kHz (IFBW = 3 kHz) 0.004 dB rms 0.001 dB rms
30 kHz to 100 kHz (IFBW = 3 kHz) 0.003 dB rms 0.001 dB rms
100 kHz to 10 MHz (IFBW = 3 kHz) 0.003 dB rms 0.0005 dB rms
10 MHz to 4.38 GHz (IFBW = 70 kHz) 0.004 dB rms 0.001 dB rms
4.38 GHz to 5 GHz (IFBW = 70 kHz) 0.006 dB rms 0.0012 dB rms
5 GHz to 6 GHz (IFBW = 70 kHz) 0.006 dB rms 0.0012 dB rms
6 GHz to 7 GHz (IFBW = 70 kHz) 0.006 dB rms 0.0012 dB rms
7 GHz to 8.5 GHz (IFBW = 70 kHz)
(at maximum output power level of sweep range) 0.006 dB rms 0.0012 dB rms
Trace noise phase 2
9 kHz to 30 kHz (IFBW = 3 kHz) 0.035 deg rms
30 kHz to 10 MHz (IFBW = 3 kHz) 0.020 deg rms
10 MHz to 4.38 GHz (IFBW = 70 kHz) 0.035 deg rms
4.38 GHz to 5 GHz (IFBW = 70 kHz) 0.050 deg rms
5 GHz to 6 GHz (IFBW = 70 kHz) 0.050 deg rms
6 GHz to 7 GHz (IFBW = 70 kHz) 0.050 deg rms
7 GHz to 8.5 GHz (IFBW = 70 kHz)
(at maximum output power level of sweep range) 0.050 deg rms
1. The specifi cation might not be met at the following frequencies: 333.333 kHz, 406.25 kHz,
857.143 kHz, 928.571 kHz, 1.3 MHz, 2.4 MHz and 4.333333 MHz.
2. The specifi cation might not be met at 5 MHz or 50 MHz.