Atec Agilent-E8802A User Manual

Page 5

Technical Specifications for the E8801A, E8802A, E8803A

Definitions....................................................................................................................................2

Corrected System Performance.................................................................................................3

Table 1. System Dynamic Range ........................................................................................3

Corrected System Performance with Type-N Connectors ..................................................4

Table 2. Corrected System Performance With 85032F Calibration Kit.........................4

Table 3. Corrected System Performance With 85092C ECal Module............................5

Corrected System Performance with 3.5 mm Connectors...................................................6

Table 4. Corrected System Performance With 85033E Calibration Kit ........................6

Table 5. Corrected System Performance With 85093C ECal Module............................7

Table 6. Corrected System Performance With 85038A Calibration Kit ........................8

Table 7. Uncorrected Instrument Performance................................................................9

Test Port Output Characteristics (Source)...............................................................................9

Table 8. Test Port Output Frequency ................................................................................9

Table 9. Test Port Output Power .....................................................................................10

Table 10. Test Port Output Signal Purity........................................................................11

Test Port and Receiver Input Characteristics ........................................................................11

Table 11. Test Port and Receiver Input Levels ...............................................................11

Table 12. Test Port Input (Trace Noise) ..........................................................................13

Table 13. Test Port Input (Reference Level and Stability) ............................................13

Table 14. Test Port Input (Dynamic Accuracy specification)........................................14

Table 15. Test Port Input (Group Delay) ........................................................................15

General Information.................................................................................................................15

Table 16. System Bandwidths...........................................................................................15

Table 17. Front Panel Information ..................................................................................16

Table 18. Rear Panel Information....................................................................................17

Table 19. Rear Panel Information (continued) ...............................................................18

Table 20. Analyzer Environment and Dimensions .........................................................19

Measurement Throughput Summary .....................................................................................20

Table 21. Typical Cycle Time (ms)...................................................................................20

Table 22. Cycle Time vs. IF Bandwidth...........................................................................20

Table 23. Cycle Time vs. Number of Points ....................................................................21

Table 24. Data Transfer Time (ms)..................................................................................22

Table 25. Recall and Sweep Speed ...................................................................................23

E8801A, E8802A, and E8803A Simplified Test Set Block Diagram...................................24

E8801A, E8802A, and E8803A with Option 014 Simplified Test Set Block Diagram .......25