Atec Agilent-E8802A - Manual (Page 18)

14
Table 14. Test Port Input (Dynamic Accuracy specification a )
Accuracy of the test port input power reading is relative to the reference input power level. Applies to input ports 1 and 2 with the following
conditions: IF bandwidth = 10 Hz, and Environmental temperature 25° ±5 °C, with < 1 °C deviation from calibration temperature
300 kHz to 3 GHz 300 kHz to 3 GHz
300 kHz to 6 GHz 300 kHz to 6 GHz
300 kHz to 9 GHz 300 kHz to 9 GHz
a Dynamic accuracy is verified with the following measurements:
•
compression over frequency
•
IF linearity at a single frequency of 1.195 GHz and a reference level of -20 dBm