Atec Agilent-E8802A - Manual (Page 11)

7
Table 5. Corrected System Performance With 3.5 mm Device Connector Type, 85093C
Electronic Calibration Module
Applies to the E8801A, E8802A, and E8803A analyzer, 85093C (3.5 mm, 50 Ω ) electronic calibration (ECal) module, N6314A test port cable,
and a full 2-port calibration. Also applies to the following conditions:
•
IF bandwidth = 10 Hz
•
No averaging applied to data
•
Environmental temperature 25° ±5 °C, with < 1 °C deviation from calibration temperature
•
Isolation calibration not omitted
Specification (dB) Description
300 kHz to
1.3 GHz
1.3 GHz to
3 GHz
3 GHz to
6 GHz
6 GHz to
9 GHz
a
Directivity 52 52 51 47
Source Match 44 44 39 34
Load Match 47 47 44 40
Reflection Tracking ±0.030 ±0.040 ±0.050 ±0.070
Transmission
Tracking ±0.039 ±0.049 ±0.068 ±0.117
Transmission Uncertainty (Specifications)
Reflection Uncertainty (Specifications)