Atec Agilent-N5227A - Manual (Page 42)

42
Table 34. Data Transfer Time (ms) - Typical
Measured with the analyzer display off.
Values will increase slightly if the analyzer display is on.
Description
Number of Points
201 401 1601 16,001 32,001
SCPI over GPIB (Program executed on external PC 2 )
32-bit floating point 4.6 9.3 38 352 720
64-bit floating point 9.4 18.8 73.4 730 1455
ASCII 36.7 72.5 288 2882 5762
SCPI over SICL/LAN or TCP/IP Socket 1 (Program executed in the analyzer)
32-bit floating point <1 <1 <1 1.2 2.4
64-bit floating point <1 <1 <1 2.3 4.6
ASCII 2.1 4 15 148 295
COM 1 (Program executed in the analyzer)
32-bit floating point <1 <1 <1 <1 <1
Variant type <1 <1 1.4 12.4 25.5
DCOM over LAN 1 (Program executed on external PC)
32-bit floating point <1 <1 <1 2.3 4.4
Variant type <1 1.6 5.3 52 105.5
1 Values are for real and imaginary pairs, with the analyzer display off, using Gigabit Ethernet.
Note: Specifications for Recall & Sweep Speed are not provided for the N522xA analyzers.