Atec Agilent-N5227A - Manual (Page 14)

14
Uncorrected System Performance
Specifications apply to following conditions:
Over environmental temperature of 25 °C ±5 °C, with less than 1°C variation from the calibration temperature.
Cable loss not included in Transmission Tracking.
Crosstalk measurement conditions: normalized to a thru, measured with shorts on all ports, 10 Hz IF
bandwidth, averaging factor of 8, alternate mode, source power set to the specified maximum power.
Table 5a. Error Terms (dB), All Ports, All Options - Specifications
Directivity
Source
Match
Load Match
Transmission
Tracking
Reflection
Tracking
Crosstalk
10 MHz to 50 MHz 17 7 6 -- -- --
50 MHz to 500 MHz 24 15 11 -- -- --
500 MHz to 2 GHz 24 10 7 -- -- --
2 GHz to 3.2 GHz 20 10 7
3.2 GHz to 10 GHz 20 7 7 -- -- --
10 GHz to 16 GHz 16 7 6 -- -- --
16 GHz to 20 GHz 16 7 7 -- -- --
20 GHz to 26.5 GHz 14 7 7
26.5 GHz to 50 GHz 13 7 6 -- -- --
50 GHz to 60 GHz 13 7 7 -- -- --
60 GHz to 67 GHz 10 6 6 -- -- --
67 GHz to 70 GHz -- -- -- -- -- --