Atec Agilent-N5227A - Manual (Page 41)

41
Table 33. Cycle Time vs. Number of Points - Typical
Applies to the Preset condition (correction off) except for the following changes:
CF = 10 GHz
Span = 100 MHz
Display off (add 21 ms for display on)
Cycle time includes sweep and retrace time.
Description IF Bandwidth (Hz)
Number of Points 1,000 10,000 30,000 600,000
3 7.8 6.3 6.3 6.3
11 16.4 6.3 6.3 6.3
51 60 11 6.3 6.3
101 114 17.2 7 6.3
201 223 29.7 9.4 6.3
401 437 54.7 14.9 7.1
801 862 105 25 7.8
1,601 1708 205 46 11
6,401 6728 805 169 30.5
16,001 16672 2005 417 68.8
32,001 33112 4006 833 134