Atec Agilent-N5227A - Manual (Page 36)

36
Table 28. (Continued) Rear Panel Information, All Options
Description Typical Performance
Pulse Outputs
Voltage (TTL) High: 3.3V to 3.5V
Low: <1V
Impedance 50 Ohm
External Test Set Driver
Function Used for driving remote mixers
Connections 3.5 mm (female)
RF Output Frequency
Range 3.2 GHz to 19 GHz
LO Output Frequency
Range 1.76 GHz to 26.5 GHz
Rear Panel LO Power 1
Upper Limit, Typical (dBm) Lower Limit, Typical (dBm)
1.7 GHz to 16 GHz 5 -3
16 GHz to 21 GHz 0 -6
21 GHz to 26.5 GHz 4 -5
Rear Panel RF1/RF2 Power
Maximum Output Power, Typical (dBm)
3.2 GHz to 5 GHz +3
5 GHz to 19 GHz +8
VGA Video Output
Connector 15-pin mini D-Sub; Drives VGA compatible monitors
Devices Supported Resolutions
Flat Panel (TFT) 1024 X 768, 800 X 600, 640 X 480
Flat Panel (DSTN) 800 X 600, 640 X 480
CRT Monitor 1280 X 1024, 1024 X 768, 800 X 600, 640 X 480
Simultaneous operation of the internal and external displays is allowed, but with 640 X 480 resolution only. If you
change resolution, you can only view the external display (internal display will "white out").
1 LO output available in full analyzer’s frequency range. The power is tested only from 3.2 GHz to 26.5 GHz.