Atec Agilent-N5227A - Manual (Page 40)

40
Table 31. Typical Cycle Time (ms) for Full-Span Measurement Completion
10 MHz to 67 GHz Number of Points
IF Bandwidth 201 401 1601 16001 32001
600 kHz
Uncorrected 55.5 72.7 94.5 182 248
2-Port cal 117 152 195 374 509
10 kHz
Uncorrected 89.1 153 519 2219 4223
2-Port cal 185 313 1042 4448 8462
1 kHz
Uncorrected 255 483 1834 17716 35172
2-Port cal 515 972 3675 35444 70375
Table 32. Cycle Time vs. IF Bandwidth - Typical
Applies to the Preset condition (201 points, correction off) except for the following changes:
CF = 10 GHz
Span = 100 MHz
Display off (add 21 ms for display on)
Cycle time includes sweep and retrace time.
Description N5227A
IF Bandwidth (Hz) Cycle Time (ms) Trace Noise Magnitude (dB rms)
600,000 6.3 0.0044
100,000 7 0.0021
30,000 10.2 0.0011
10,000 29.7 0.0007
3,000 71.9 0.0006
1,000 223 0.0004
300 641 0.0004
100 1825 0.0003
30 5981 0.0003
10 17834 0.0003
3 59273 0.0003