Atec Agilent-N5227A - Manual (Page 39)

39
Measurement Throughput Summary
Typical Cycle Time for Measurement Completion
Cycle Time vs. IF Bandwidth
Cycle Time vs. Number of Points
Data Transfer Time
Cycle time Includes sweep time, retrace time and band-crossing time. Analyzer display turned off with
DISPLAY:ENABLE OFF. Add 21 ms for display on. Data for one trace (S
11
) measurement.
Table 30. Typical Cycle Time (ms) for Measurement Completion, All Models and Options
Sweep
Range IF
Bandwidth
Number of Points
201 401 1601 16001 32001
9 GHz to
10 GHz
600 kHz
Uncorrected 6.3 7 10.9 69.5 135
2-Port cal 18.8 20.3 30.5 152 291
10 kHz
Uncorrected 28.1 54.7 205 2003 4006
2-Port cal 67.2 117 418 4028 8062
1 kHz
Uncorrected 225 444 1744 17041 33853
2-Port cal 463 900 3500 34100 67744
10 GHz to
20 GHz
600 kHz
Uncorrected 19.5 20.3 25.8 79.7 141
2-Port cal 46.9 49.2 60.2 174 310
10 kHz
Uncorrected 69.5 128 259 2012 4012
2-Port cal 146 264 528 4041 8072
1 kHz
Uncorrected 235 459 1783 17384 34538
2-Port cal 477 924 3575 34788 69103