Atec Agilent-N5227A - Manual (Page 23)

23
Test Port Input
Table 16. Test Port Noise Floor (dBm) @ 10 Hz IFBW, All Options
Total average (rms) noise power calculated as the mean value of a linear magnitude trace expressed in dBm.
May typically be degraded at particular frequencies below 500 MHz due to spurious receiver residuals.
Description Specification Typical
10 MHz to 50 MHz -70 -76
50 MHz to 100 MHz -92 -97
100 MHz to 500 MHz -101 -106
500 MHz to 1 GHz -110 -115
1 GHz to 10 GHz -114 -119
10 GHz to 13.5 GHz -114 -120
13.5 GHz to 24 GHz -116 -121
24 GHz to 26.5 GHz -117 -121
26.5 GHz to 35 GHz -106 -112
35 GHz to 40 GHz -104 -110
40 GHz to 50 GHz -101 -108
50 GHz to 60 GHz -101 -107
60 GHz to 67 GHz -101 -108
67 GHz to 70 GHz -- -106