Atec Agilent-N5227A - Manual (Page 24)

24
Table 17. Direct Receiver Access Input Noise Floor (dBm)
Total average (rms) noise power calculated as the mean value of a linear magnitude trace expressed in dBm.
May typically be degraded at particular frequencies below 500 MHz due to spurious receiver residuals.
Description Specification Typical
Options 201, 219, 401, 419 Options 201, 219, 401, 419
10 MHz to 50 MHz -- -116
50 MHz to 100 MHz -104 -124
100 MHz to 500 MHz -113 -133
500 MHz to 1 GHz -122 -142
1 GHz to 2 GHz -126 -133
2 GHz to 10 GHz -125 -133
10 GHz to 13.5 GHz -125 -134
13.5 GHz to 24 GHz -127 -135
24 GHz to 26.5 GHz -128 -135
26.5 GHz to 30 GHz -117 -126
30 GHz to 35 GHz -116 -125
35 GHz to 40 GHz -114 -123
40 GHz to 45 GHz -111 -120
45 GHz to 50 GHz -110 -120
50 GHz to 67 GHz -109 -118
67 GHz to 70 GHz -- -116