Atec Agilent-N5227A - Manual (Page 37)

37
Table 28. (Continued) Rear Panel Information, All Options
Description Typical Performance
Bias Tee Inputs
Connectors BNC(f) for ports 1, 2, 3 and 4
Fuse 500 mA, bi-pin style
Maximum Bias Current +/-200 mA with no degradation of RF specifications
Maximum Bias Voltage +/-40 VDC
Trigger Inputs/Outputs BNC(f), TTL/CMOS compatible
Test Set IO 25-pin D-Sub connector, available for external test set control.
Power IO 9-pin D-Sub, female; analog and digital IO
Handler IO 36-pin parallel I/O port; all input/output signals are default set to negative logic;
can be reset to positive logic via GPIB command.
GPIB Two ports - dedicated controller and dedicated talker/listener. 24-pin D-sub (Type
D-24), female; compatible with IEEE-488.
Parallel Port (LPT1) 25-pin D-Sub miniature connector, female; provides connection to printers or any
other parallel port peripherals
USB Ports Four ports on front panel (all Host) and five ports (four Host and one Device) on
rear panel. Type A configuration (eight Host) and Type B configuration (one
Device), USB 2.0 compatible. The total current limit for all rear panel USB ports is
2.0 amps. The total current limit for all front panel USB is 0.9 amps.
LAN 10/100BaseT Ethernet, 8-pin configuration; auto selects between the two data
rates
Line Power
Frequency, Voltage 50/60/400 Hz for 100 to 120 VAC
50/60 Hz for 220 to 240 VAC
Power supply is auto switching
Max 450 watts