Atec Agilent-85133F - Manual (Page 69)

Installing the System 2
Installation and User’s Guide 69
1
2 Complete the receiving
checklist.
a Compare the Bill of Materials to the system
components received in the shipment.
b Verify the shipment is complete.
• If the shipment is confirmed incomplete,
go to
step 3 .
• If you have confirmed the presence of all
system components, the receiving
process is complete. Proceed to the next
section
“To ensure your safety while
using the system" on page 76.
• Refer to the Bill of Materials included
with the shipment.
3 If the system is
incomplete, report
missing items to your
Agilent Technologies
sales representative.
• For a list of support contacts, see “To
receive additional assistance" on
page 107.
Table 18 Replaceable Parts
Part or Model Number Description
10833A GPIB cable, 1 meter
10833B GPIB cable, 2 meter
10833C GPIB cable, 4 meters
10833D GPIB cable, 0.5 meter
11612T Option K33 Mounting plates, bias networks to probe station
11612V Option K11 Bias network, port 1, 45 MHz to 50 GHz, 0.5 A
11612V Option K21 Bias network, port 2, 45 MHz to 50 GHz, 0.5 A
11900A Adapter, 2.4 mm (male-to-male)
11900B Adapter, 2.4 mm (female-to-female)
11900C Adapter, 2.4 mm (male-to-female)
1250-0080 Adapter, BNC, 50 ohm (female-female)
1250-1700 Adapter, coax
1250-2405C Adapter, BNC coaxial tee
1250-3231 Adapter, triaxial BNC (female to male)
16048D Test leads, 4 terminal pair, 1.98 meter
16493J Option 001 Interlock cable, 1.5 meter
16493L Option 001 GNDU cable, 1.5 meter
To verify the shipment (continued)
Step Action Notes