Atec Agilent-8510C - Manual (Page 5)

5
Agilent 8510SX
45 MHz to 26.5 GHz
The following specifications describe the system perfor-
mance for the 8510C network analyzer with the 8510SX
configuration. The system hardware includes the following:
Test set: 8515A S-parameter test set
RF source: 83631B synthesized sweeper
Calibration kit: 85052C 3.5mm precision
calibration kit
Calibration technique: TRL two-port calibration
Dynamic range (for transmission measurements)
Frequency range (GHz)
0.045–2 2–8 8–20 20–26.5
Maximum power
measured at port 2
+2 dBm +3 dBm +3 dBm –1 dBm
Reference power
at port 1 (nominal)
–5 dBm –9 dBm –14 dBm –25 dBm
Minimum power
measured at port 2
–98 dBm –98 dBm –100 dBm –99 dBm
Receiver dynamic range 100 dB 101 dB 103 dB 98 dB
System dynamic range 93 dB 89 dB 86 dB 74 dB
Measurement uncertainty
Measurement
port character-
istics
Frequency range (GHz)
RESIDUAL 0.045–2 2–8 8–20 20–26.5
Directivity 48 dB 50 dB 50 dB 50 dB
Source match 40 dB 50 dB 50 dB 50 dB
Load match 48 dB 50 dB 50 dB 50 dB
Reflection tracking ±0.003 dB ±0 dB ±0 dB ±0 dB
Transmission tracking ±0.009 dB ±0.004 dB ±0.009 dB ±0.01 dB
Crosstalk 114 dB 111 dB 106 dB 95 dB
Frequency range (GHz)
RAW (Typical) 0.045–2 2–8 8–20 20–26.5
Directivity 24 dB 24 dB 28 dB 27 dB
Source match 23 dB 23 dB 16 dB 14 dB
Load match 23 dB 23 dB 16 dB 14 dB
Reflection measurements
Transmission measurements
System dynamic range
Magnitude Phase
Magnitude Phase