Alpha Technologies Cordex Controller Ver.2.0 - Manual (Page 96)

Refer to the back of this manual for Factory Service and Technical Support contact information
Alpha Technologies Ltd. 034-136-C0 Rev B WC
Printed in Canada. © 2010 Alpha Technologies Ltd. ALPHA and CORDEX are trademarks of Alpha Technologies Ltd. All Rights Reserved. Page 94 of 122
9.2 PPP Serial Data Connection
The user must set up a “direct cable connection” for the workstation to be connected (with a null modem cable) to
the CXC Craft port (address 10.10.10.203). Follow the example (e.g., in Windows
 2000) below:
9.2.1 Starting Networking Wizard
Select START MENU, SETTINGS, and then select NETWORK AND DIAL-UP CONNECTIONS as shown below:
Figure 102–Starting networking wizard
A new window will open, similar to below:
Figure 103–Make New Connection icon
Double-click the MAKE NEW CONNECTION icon to start the Network Connection Wizard.