Alpha Technologies Cordex Controller Ver.2.0 - Manual (Page 71)

Visit the Alpha website at www.alpha.ca for the latest manual and product downloads
Alpha Technologies Ltd. 034-136-C0 Rev B WC
Printed in Canada. © 2010 Alpha Technologies Ltd. ALPHA and CORDEX are trademarks of Alpha Technologies Ltd. All Rights Reserved. Page 69 of 122
ADIO Configure Signals – enables the Supervisor to input a value for a range to be applied to
all selected channels. In this case, the BCMC if so equipped:
Figure 60–BCMC configuration example one (set DCCT range in Amps)
Figure 61–BCMC configuration example two (set String Current range in Amps)
ADIO Static Calibration (Web Interface Only) – enables the Supervisor to calibrate ADIO
(except BCMC) analog inputs without the need for a live signal at the input. This is similar to
Static Calibration for controller analog inputs described previously.