Alpha Technologies Cordex Controller Ver.2.0 - Manual (Page 25)

Visit the Alpha website at www.alpha.ca for the latest manual and product downloads
Alpha Technologies Ltd. 034-136-C0 Rev B WC
Printed in Canada. © 2010 Alpha Technologies Ltd. ALPHA and CORDEX are trademarks of Alpha Technologies Ltd. All Rights Reserved. Page 23 of 122
4.6 Alarm Indication (active area)
Within the default operating screen, the Alarm Indication window may show icons on the left margin to indicate
various alerts (such as an active alarm and priority of the condition). In the middle of the window, text will scroll
indicating alarm notification or status. Navigation keys (on the right) aid the user to view the text.
Tap this active area, located below Analog Signals Display on the “home” page (Figure 2), to enter a new window
of operation for alarm display and configuration, see Figure 11 below:
Figure 11–Alarm indication display screen
4.6.1 Cutoff All Alarms
Tap “Cutoff All Alarms” (button shown above) to silence active alarms. In addition, on any screen where the
alarm indication is shown (as in previous figures), the User may tap the alarm indication “button” to display a pull-
down menu (Figure 12 below) for alarm cutoff (also known as ALCO, see 6.5.1):
Figure 12–Alarm cutoff pull-down menu
Mode (+Temp Comp) display
Accept changes and
return to previous screen
Battery Volts and
Load Current display
FL + TC 54.00V 250A
Use slider to change alarm scroll rate
Tap to view alarm history
Discard changes and
return to previous screen
Alarm will scroll here...
Cutoff All Alarms
Scroll Rate
1 s
Show Alarm History
Tap to silence active alarms
Verify action and return to previous screen
Alarms will display here in a list
Use pull-down menu to select priority,
either major, minor, message, or all
FL + TC 54.00V 250A
Use pull-down menu to cutoff all alarms
Alarm displays here
Cutoff All Alarms
Cancel