Alpha Technologies Cordex Controller Ver.2.0 - Manual (Page 28)

Refer to the back of this manual for Factory Service and Technical Support contact information
Alpha Technologies Ltd. 034-136-C0 Rev B WC
Printed in Canada. © 2010 Alpha Technologies Ltd. ALPHA and CORDEX are trademarks of Alpha Technologies Ltd. All Rights Reserved. Page 26 of 122
4.8 Date and Time (active area)
On the “home” page (Figure 2), below the Alarm Indication, the date and time are displayed. To change the date
(year, month, day) and time (hour, minute, second) settings, tap the active area of the screen to enter a new
window of operation, see Figure 17 below:
Figure 17–Date and time setting window
NOTE: The CXCP and CXCR models provide battery backup of time and date; the other CXC models do not.
With the web interface, SNTP (Simple Network Time Protocol) may be used, see 4.10.1. This feature enables
synchronization of the CXC device time with an external source; i.e., the user’s network.
4.9 Saving Settings
Return to MAIN MENU navigation screen.
1. Press the OPTION button to evoke the SAVE/LOGOUT pop-up window, see 5.1.2.
2. Select SAVE to save the new settings (or select LOGOUT to clear).
A pop-up window will appear for confirmation of the selection.
Alternatively, for the web interface:
1. Click Submit Changes (upper left on web interface window).
2. Click Accept button on the Compare Settings window.
Accept changes and
return to previous screen
Tap arrows to increase or
decrease values as required
Date
2008 08 08
Time
09 15 20
Discard changes and
return to previous screen