Sis command tables, Commands, See the – Extron Electronics SMX System Setup Guide User Manual

Page 28: Sis command t ables

SMX System MultiMatrix Switcher • SIS Programming Guide

SIS Command T

ables

Command

ASCII Command

(host to switcher)

Response

(switcher to host)

Additional Description

Output Switching by Plane

NOTES:

The

& tie command for RGBHV and the

% command for video can be used interchangeably

The

! tie command can be used for switching both video signals and audio signals with the same plane address.

Tie input to an output (RGBHV)

X2@

Out

•

RGB

]

Tie input

to output

on plane

X2@

for RGB signals.

Tie input to an output (video)

X2@

Out

•

Vid

]

Tie input

to output

on plane

X2@

for video signals.

Tie input to an output (audio)

X2@

Out

•

Aud

]

Tie input

to output

on plane

X2@

for audio signals.

Tie input to an output (all)

X2@

Out

•

All

]

Tie input

to output

on plane

X2@

for all signals.

NOTES:

The

& tie command for RGB and the

% tie command for video can be used interchangeably

The

& read tie command for RGB and the

% read tie command for video can be used interchangeably

Tie input to all (RGBHV)

X2@

•

RGB

]

Tie input

to all outputs on plane

X2@

for RGB signals.

Tie input to all (video)

X2@

•

Vid

]

Tie input

to all outputs on plane

X2@

for video signals.

Tie input to all (audio)

X2@

•

Aud

]

Tie input

to all outputs on plane

X2@

for audio signals.

Tie input to all (audio and video)

X2@

•

All

]

Tie input

to all outputs on plane

X2@

, all signals.

NOTES:

= Input number

- <

maximum numb

er of inputs

= untied

= Output number

- <

maximum number of outputs

X2@

= Plane number

, 90

(virtual plane)