Extron Electronics SMX System Setup Guide - Manual (Page 17)

11 SMX System MultiMatrix Switcher • Front Panel Operation
3. Pick a global preset number (see figure 14 ) and perform one of
the following:
•
To save a global preset, press the desired input or output
button. This overwrites a previously saved global preset.
•
To recall a global preset, press the desired lit input or lit output
button.
INPUTS
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
OUTPUTS
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
Figure 16. Global Preset 21 Selected — an Example
Upon selection, the button and the Enter
button flash red.
4. Press the Enter button to save or recall
presets.
Saving or Recalling a Plane Preset
1. Press the Esc button to clear any pending changes. The button
flashes once.
2. Perform one of the following:
a. To save a plane preset, press and hold the Preset button for 2
seconds. The Preset button flashes red.
b. To recall a plane preset, press and release the Preset button.
The Preset button lights red.
3. Press the desired plane button. The button lights and any saved
plane presets light red.
4. Pick a plane preset number (see figure 14 ) and perform one of the
following:
•
To save a plane preset, press the desired input button. The
selected button and the Enter button flash red.
•
To recall a plane preset, press the desired lit Input button. The
selected button and the Enter button flash red.
INPUTS
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
OUTPUTS
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
Figure 17. Plane Preset 7 with Plane Preset 3 Selected — an
Example
5. Press the Enter button to save or recall the
plane preset.
ENTER
C O N T R O L
PRESET ESC VIEW
ENTER
C O N T R O L
PRESET ESC VIEW