Extron Electronics PVS 305SA User Guide - Manual (Page 43)

5-3 PVS 305SA Switcher • Software Configuration
Software Configuration, cont’d
4 . Complete the on-screen form and download the .exe file to the PC.
5 . Launch the .exe installation wizard. Follow the on-screen prompts
and install the software on the PC. This also installs a desktop icon
(see image at right).
6 . With the switcher connected to the PC, either through an RS-232 or LAN
connection via the MediaLink Controller, click on the desktop icon to launch
the MLS Configuration Utility.
7 . Alternatively, select the offline emulation mode to emulate the PVS 305SA
settings without connecting to the switcher.
N The RS-232 connection to the switcher is either serial direct or through the
MediaLink Controller. Select as appropriate.
8 . Once the program is running and the connection is made, click on Help,
Contents
(or press F1), and follow the instructions.
Installing the Global Configurator
From the DVD
1 . Insert the DVD in the appropriate drive of the PC or laptop that is connected
to the switcher through the MediaLink Controller (MLC 104 IP Plus). Run the
DVD and install the Extron Global Configurator program.
2 . Once the program is installed, click on the desktop icon to open the program
and select the desired start option. Click OK.
N If unsure which option to select, the View Global Configurator Help File option
opens the Help file, which is a step by step guide to using Global Configurator.