Extron Electronics DXP Series - Manual (Page 43)

Matrix Software, cont’d
Digital XPoint Matrix Switchers • Matrix Software 5-2
Matrix Software
Matrix Switchers Control Program
The Windows-based Extron Matrix Switchers Control Program, which
communicates with the switcher via the rear panel Remote RS-232/RS-422 port
provides an easy way to set up ties and sets of ties. The program is compatible
with Windows 2000 and Windows XP.
Installing the software
The program is contained on the Extron Software Products CD-ROM, disk B.
Install the software as follows:
1 . Insert the CD-ROM into the drive. The installation program should start
automatically. If it does not self-start, run Launch.exe from the CD.
The Extron software CD window appears (figure 5-1).
Figure 5-1 — Software CD window
2 . Click the Software tab (figure 5-1).
3 . Scroll to the desired program (Matrix Switchers Control Program) and click
Install (figure 5-2).
Figure 5-2 — Software installation
4 . Follow the on-screen instructions. By default, the Windows installation of the
Matrix Switchers Control Program creates a C:\Program Files\Extron\
Matrix_Switcher directory, and it places three icons into a group folder named
“Extron Electronics\Matrix Switchers.” The three installed icons are:
• MATRIX Switcher+ Control Program
• MATRIX Switcher+ Help
• Uninstall MATRIX Switcher
ams: