Extron Electronics DXP Series - Manual (Page 14)

2-3 Digital XPoint Matrix Switchers • Installation
Mounting instructions
Rack mount the switcher as follows:
1 . Attach the rack mounting brackets to the switcher with the eight
provided #8 machine screws (figure 2-1).
1.5A MAX
100-240V 50-60Hz
INPUTS 1 2
3
4 5
6 7
8
OUTPUTS 1
2
3
4
5
6
7
8
EXT . REF .
IN
RS232/422
OUT
#8 Screw (4 Places)
Each Side
Mounting Screws (2 Plcs)
Each Side
or
Rack-mounting
Bracket
Table/
Wall-mounting
Bracket
Drill pilot holes —
3/32” (2.4 mm) dia.
1/4” (6.4 mm) deep
Figure 2-1 — Mounting the Digital XPoint Switcher
2 . Insert the switcher into the rack, aligning the holes in the mounting
bracket with those of the rack.
3 . Secure the switcher to the rack using the supplied machine screws.