Extron Electronics DXP Series - Manual (Page 28)

3-11 Digital XPoint Matrix Switchers • Operation
1 . Press and release the Preset button (figure 3-21).
1 2 3 4
Press and release the Preset button.
The LCD displays the outputs. The
tied inputs are not shown until you
select a preset.
PRESET
INPUTS
OUTPUTS
Figure 3-21 — Selecting view/recall preset mode
2 . Press and release the Output 1 button (figure 3-22).
Press and release the Output 1
button. (The Output 1 button
selects preset 5 on a DXP 44 SDI.)
The button lights red. The Enter button
blinks red to indicate
that the preset is
available for recall. The LCD displays
the preset's
configuration.
Each output is
listed on the top
line. The bottom
line shows the
tied input.
OUTPUTS CONTROL
ENTER PRESET
= Blinking Button
4
_ _ 5
5
1 2 3 1 2 3 4
INPUTS
OUTPUTS
Figure 3-22 — Selecting the preset
3 . To view a different preset , press and release a different input or output
button.
4 . To stop viewing presets without recalling a preset , press and release the
Preset button (figure 3-23).
Press the Preset button to
exit without recalling the
preset.
CONTROL
ENTER PRESET
STATUS
D X P 4 4
E X T RON
The LCD returns to the
default display.
All buttons return to unlit or
background illumination.
Figure 3-23 — Press Preset to exit
5 . To recall the preset , press and release the Enter button (figure 3-24). The
configuration stored in memory location 5 is now the current configuration.
Press the Enter button to
recall the preset.
CONTROL
ENTER PRESET
STATUS
D X P 4 4
E X T RON
The LCD returns to the
default display.
All buttons return to unlit or
background illumination.
Figure 3-24 — Press Enter to recall