YSI IQ S ENSOR N ET System 182 - Manual (Page 25)

System 182 Installation
3 - 11 ba76022e01 12/2011
Stacking the
MIQ modules
Fig. 3-9 Stacking the MIQ modules (variant 2)
Fig. 3-10 Closing the enclosure (variant 2)
7 Attach the prepared MIQ module to the back of the Universal
Transmitter. At the same time, ensure that the two clips on the
Universal Transmitter click into place in the lid of the
MIQ module. Subsequently, tighten the two screws (pos. 8 in
Fig. 3-8).
8 Close the MIQ module and fix it with the two countersunk
screws (pos. 5 in Fig. 3-10).
MIQ module
DIQ/S 182
MIQ module
DIQ/S 182