YSI IQ S ENSOR N ET System 182 - Manual (Page 21)

System 182 Installation
3 - 7 ba76022e01 12/2011
Premounting the ISO
blind nuts
Fig. 3-3 Premounting the ISO blind nuts (variant 1)
4 Attach the contact base (pos. 5 in Fig. 3-2) on the Universal
Transmitter with the two plastic tapping screws (pos. 6).
5 On the Universal Transmitter, remove the two countersunk
screws (pos. 7 in Fig. 3-2) and swing open the lid.
6 Insert the cheese-head screws (pos. 8 in Fig. 3-3) with the
plastic washers in the drilled mounting holes in the enclosure
and loosely screw in the ISO blind nuts (pos. 9).
9
8
DIQ/S 182