YSI IQ S ENSOR N ET System 182 - Manual (Page 103)

System 182 Outputs
6 - 13 ba76022e01 12/2011
Negative characteristic
curve
The proportional output range begins below the initial value. If the
proportional range is undercut or exceeded, the selected behavior
comes into force.
Fig. 6-10 Pulse width output
Fig. 6-11 Frequency output
1 Start value
Measured value with a minimum pulse width or switching
frequency
2 End value
Measured value with a maximum pulse width or switching
frequency
0
50
100
Measured value
Proportional
band
1
50 % of maximum
switching frequency
Maximum
switching frequency
Time
2
Switching frequency f [1/min]
Minumum
switching frequency