YSI 556 MPS - Manual (Page 91)

System Setup Section 10
YSI Incorporated YSI 556 MPS Page 85
5. Press the Escape key repeatedly to return to the main menu
screen.
10.6 Comma Radix
The user can toggle between a period (default) and comma for the radix
mark by selecting this item and pressing the Enter key as follows:
1. Go to the system setup screen as described in Section 10.1
Accessing the System Setup Screen.
2. Use the arrow keys to highlight the Comma radix selection
on the system setup screen. See Figure 10.2 System Setup
Screen.
3. Press the Enter key. A check mark appears in the check box
next to the comma radix selection indicating that the radix
mark is a comma.
10.7 ID
This selection allows you to enter an identification name/number for your
YSI 556 MPS. This ID name/number is logged in the header of each file.
1. Go to the system setup screen as described in Section 10.1
Accessing the System Setup Screen.
2. Use the arrow keys to highlight the ID selection. See Figure
10.1 Main Menu.
3. Use the keypad to enter an alphanumeric ID up to 15
characters in length. Refer to Section 2.9 Keypad Use.
4. Press the Enter key to enter the ID.
5. Press the Escape key repeatedly to return to the main menu
screen.
10.8 GLP Filename
This selection allows you to enter a different filename for the YSI 556 MPS
Calibration Record file.