YSI 556 MPS - Manual (Page 66)

Section 8 File
YSI 556 MPS YSI Incorporated Page 60
5. Set the Comm port number to match the port the YSI 556
MPS is connected to. After this setup procedure, the following
screen will be present on your PC monitor:
8.4.2 Uploading a .DAT File
1. Setup the instrument as described in Section 8.4.1 Upload
Setup.
2. Go to the YSI 556 MPS file screen as described in Section 8.1
Accessing the File Screen.
3. Use the arrow keys to highlight the Upload to PC selection.
See Figure 8.2 File Screen.
4. Press the Enter key. The file list screen is displayed. See
Figure 8.3 File List Screen.
5. Use the arrow keys to highlight the DAT file that you wish to
transfer and press Enter, both the YSI 556 MPS and PC
displays show the progress of the file transfer.