YSI 556 MPS - Manual (Page 81)

Logging Section 9
YSI Incorporated YSI 556 MPS Page 75
If a continuous stream of points is being logged, the start logging entry in
the run screen changes from Start logging to Stop logging.
Figure 9.12 Logging Screen
12. At the end of the logging interval, press Enter to stop
logging.
13. Refer to Section 8.3 View File to view the data on the
instrument display.
9.7 Logging Data with a Site List
1. If you have not already created a site list, refer to Section 9.4
Creating a Site List.
2. Follow Steps 1 through 5 in Section 7.1 Real-Time Data.
3. Use the arrow keys to highlight the Log one sample selection
on the run screen if only a single sample is being logged.
OR Use the arrow keys to highlight the Start logging
selection on the run screen if a data stream is being logged.
See Figure 9.9 Run Screen.
4. Press the Enter key. The Pick a site screen is displayed.