Acer AW2000h-AW170h - Manual (Page 94)

4 System BIOS 78
IP Address
Note: This feature can be changed by the user when the IP Source
is set to Static.
The BIOS will automatically display the IP address of the machine. This
should be in decimal and in dotted quad form (i.e., 192.168.10.253).
The value of each three-digit number separated by dots should not
exceed 255.
Subnet Mask: This item displays the current subnet mask setting for
your IPMI connection. This should be in decimal and in dotted quad
form (e.g., 192.168.10.253). The value of each three-digit number
separated by dots should not exceed 255.
Gateway Address: The BIOS will automatically display the Gateway
address of this machine. This should be in decimal and in dotted quad
form (i.e., 192.168.10.253). The value of each three-digit number
separated by dots should not exceed 255.
Mac Address: The BIOS will automatically enter the Mac address of this
machine. Mac addresses are 6 two-digit hexadecimal numbers (Based
16, 0 to 9, A, B, C, D, E, F) separated by dots. (e.g., 00.30.48.D0.D4.60).
Remote Access Configuration
Remote Access: This allows you to enable Remote Access support. If
Remote Access is set to Enabled, the following items will be displayed: