Acer AW2000h-AW170h - Manual (Page 89)

73
Note: The system may shut down if it continues for a long period
to prevent damage to the CPU. The information provided above is
for your reference only. For more information on thermal
management, please refer to Intel’s Web site at www.intel.com.
System Temperature: The system temperature will be displayed (in
degrees in Celsius and Fahrenheit) as it is detected by the BIOS.
Fan1 to Fan 4 Reading: This feature displays the fan speed readings
from fan interfaces Fan1 through Fan4.
Fan Speed Control Modes: This feature allows you to decide how the
system controls the speeds of the onboard fans. The CPU temperature
and the fan speed are correlated. When the CPU on-die temperature
increases, the fan speed will also increase for effective system cooling.
Select Full Speed/FS to allow the onboard fans to run at full speed for
maximum cooling. The FS setting is recommended for special system
configuration or debugging. Select Performance/PF for better system
cooling. The PF setting is recommended for high-power-consuming
and high-density systems.
Select Balanced/BL for the onboard fans to run at a speed that will
balance the needs between system cooling and power saving. The BL
setting is recommended for regular systems with normal hardware
confi gurations. Select Energy Saving/ES for best power effi ciency and
maximum quietness.
Voltage Monitoring: Indicates CPU1 Vcore, CPU2 Vcore, 1.5V, 5V, 12V,
CPU1 DIMM, CPU2 DIMM, 3.3V, 3.3VSB, and VBAT readings.