Acer AW2000h-AW170h - Manual (Page 69)

53
Removing a memory module
Important: Before removing any DIMM from the mainboard,
make sure to create a backup file of all important data.
1 Remove the memory module.
a
Press the holding clips on both sides of the DIMM slot outward
to release the DIMM.
b Gently pull the DIMM upward to remove it from the DIMM
slot.
2 If you intend to install a new memory module, refer to the
previous section.
To reconfigure the system memory
The system automatically detects the amount of memory installed. Run
the BIOS setup to view the new value for total system memory and
make a note of it.