Acer AW2000h-AW170h - Manual (Page 28)

1 System tour 12
Mainboard jumper settings
Note: Jumpers not indicated are for test purposes only.
No. Jumper Description Default Setting
1 JWD1 Enable/Disable/
Reset Watch Dog Pins 1-2 (Reset)
2 JBT1 Clear CMOS Instead of pins, this jumper consists
of contact pads to prevent
accidental clearing of the CMOS
contents. To clear CMOS, disconnect
the power and short the CMOS
pads with a metal object such as a
small screwdriver.
3 JPG1 Enable/Disable VGA Pins 1-2 (Enabled)
4 JPL1/
JPL2 Enable/Disable
LAN1/2 Pins 1-2 (Enabled)