Opening the server, Removing the top cover – Acer AW2000h-AW170h User Manual
Page 52
3 System upgrades
36
Opening the server
Caution! Before you proceed, make sure that you have turned off
the system and all peripherals connected to it. Read the “Pre-
installation instructions” on page 24.
You need to open the server before you can install additional
components or access the system’s internal components. Refer to the
following sections for instructions.
Removing the top cover
Note: Observe the ESD precautions and pre-installation
instructions described on page 24.
1
Remove the two screws securing the cover to the chassis.
2
Lift the cover off the chassis.
3
Put the top cover aside for reinstallation later.
This manual is related to the following products: