Asus AP2400R-E2(AS8) - Manual (Page 40)

C h a p t e r 2 : H a r d w a r e s e t u p C h a p t e r 2 : H a r d w a r e s e t u p C h a p t e r 2 : H a r d w a r e s e t u p C h a p t e r 2 : H a r d w a r e s e t u p C h a p t e r 2 : H a r d w a r e s e t u p 2 - 2 0 2 - 2 0 2 - 2 0 2 - 2 0 2 - 2 0
9. Re-connect the 4-pin power plug
to the connector inside the
cage.
When re-connecting the power
plug, place the PCI cage close
enough to avoid pulling the
power cable.
10. Before re-installing the PCI cage
into the chassis, check that all
cables on the PCI cage bay are
properly connected and routed.
C a b l e s o n t h e P C I c a g e b a y C a b l e s o n t h e P C I c a g e b a y C a b l e s o n t h e P C I c a g e b a y C a b l e s o n t h e P C I c a g e b a y C a b l e s o n t h e P C I c a g e b a y
11. Take note of the two pegs on
the PCI cage bay. These pegs
should match the holes on the
cage to make sure it fits in
place.
P C I c a g e p e g s P C I c a g e p e g s P C I c a g e p e g s P C I c a g e p e g s P C I c a g e p e g s