GE Industrial Solutions SG Series 10 – 20 – 30 – 40 kVA Operating Manual User Manual
Page 33

Modifications reserved
Page 33/83
OPM_SGS_USM_10K_40K_0US_V030.doc
Operating Manual SG Series 10 –20 – 30 - 40 kVA
3. Telephone
numbers
Tel1:
Tel1 enabled: N
Tel2:
Tel2 enabled: N
m e te rin g
a la rm s
p a ra m e te rs
+
–
o k
Tel1
This parameter specifies a first telephone number to be used for modem dial-out.
The telephone number has a maximum 39 characters and cannot contain blanks.
If the desired number is shorter than 39 characters, the string will finish with blanks.
Tel1 enabled This
parameter
Y/N specifies if the first telephone number will be used for dial-out.
Tel2 A
second dial-out number.
Tel2 enabled This
parameter
Y/N specifies if the second telephone number will be used for dial-out.
Tel3 A
third dial-out number.
Tel3 enabled This
parameter
Y/N specifies if the third telephone number will be used for dial-out.
Tel4 A
fourth dial-out number.
Tel4 enabled This
parameter
Y/N specifies if the fourth telephone number will be used for dial-out.
4. LCD
Display
LCD Display
UPS NAME: SG Series
Contrast = 9
Language = ENGLISH
m etering
alarm s
param eters
+
–
ok
UPS Name
The user can choose the name of the UPS model shown on the main page (max. 7
characters).
LCD Contrast
This parameter controls the contrast of the LCD screen in ten steps.
It can be adapted depending on the room lighting.
LCD Language This parameter allows the choice of language used to display the information.
Valid choices are English, German, Italian, Spanish, French, Finnish, Tschech, Slovak,
Polish and Portuguese.