3 parameters, Parameters – GE Industrial Solutions SG Series 10 – 20 – 30 – 40 kVA Operating Manual User Manual
Page 27

Modifications reserved
Page 27/83
OPM_SGS_USM_10K_40K_0US_V030.doc
Operating Manual SG Series 10 –20 – 30 - 40 kVA
6.3 PARAMETERS
The parameters mode is entered any time the parameters button is pressed.
The LCD will display a series of screens containing the user parameters, accessible without password
protection.
The buttons perform the following functions:
metering Abandon
parameters mode and enter metering mode.
alarms Abandon
parameters mode and enter alarms mode.
parameters
Scroll forward to the next screen.
+
Scroll forward to the next screen.
–
Select from the current screen the parameter to edit.
ok
Start the editing for the currently selected parameter.
NOTE !
During parameters mode there is no means to perform scroll back on the display.
Example of operation within parameters mode:
Purpose: to correct a wrong telephone number previously stored in Tel2.
1 – Entering parameters mode (parameters). The first screen is displayed.
DATE AND TIME
D M Y
Date: 01.01.2006
Time: 12:45:07
metering
1
alarms
parameters
+
–
ok
2 – Scroll to the next screen (+). The second screen is displayed.
PROTOCOL SETUP
Modem enabled=N
Init=BEQV1X3&D0S0=2
Alarm= N
Delay=22s
metering
2
alarms
parameters
+
–
ok