GE Industrial Solutions 6KCV301DNET - Manual (Page 29)

6KCV301DNET
29
——————
Interface card DeviceNet
——————
6.2.3.1 DeviceNet error types
DNetStatus Meaning
C o d e
0
No error exists
1 Resource not available
2 Value out of range
3 transportClass_trigger invalid
4 Invalid service for object state
5 Illegal message format
6 Invalid condition for transmission
7 Outstanding request exists
8 Object does not exist
9 Service not supported
1 0 Duplicate MacId check response received
1 1 Duplicate MacId check request received
1 2 Object not available
1 3 OpenAllIOCnxn failed
1 4 Duplicate MacId error
1 5 Time-out error
1 6 Software error
1 7 Message error
1 8 Hardware error
DnetStAux Meaning
C o d e
0
No additional information
1 All available group 2 message identifiers have been allocated
2 Invalid Ainitial_comm_characteristic@ attribute
3 All available group 1 message identifiers have been allocated
4 All available group 3 message identifiers have been allocated
5 Invalid value within the AtransportClass_trigger@ attribute
6 An Apply request is sent to a Connection instance when it is in
the Established or Timed-out state
7 Illegal to send fragmented explicit Connection message
8 Connection object must be in Established state and must
beMessaging type of Connection in order to send a cnxn-based
request
9 Cannot send cnxn-based request since a request is outstanding
1 0 Invalid instance identifier specified in received explicit message
request
1 1 Explicit message request is directed at non-existent cnxn instance
1 2 A Create request can only be sent to the class, not a particular
instance
1 3 ConfigCnxnndex already set
1 4 Unable to create cnxn class
1 5 Apply_attribute cannot be sent to the cnxn class, only a specific
instance
1 6 Invalid service code received in explicit message request
1 7 Class specified in received Cnxn Based Explicit request message
does not exist