GE Industrial Solutions CAR1212DC series - Manual

GE
Data Sheet
October 21, 2013 ©2013 General Electric Company. All rights reserved.
CAR1212DC series DC-DC converter
Input: -36V
D C
to -75V
DC
; Output: 12V
DC
@ 1200W; 3.3V
DC
or 5 V
DC
@ 1A
Features
• Input Or’ing
• Reverse input protection
• 3 front panel LEDs: 1-input;2-output; 3 - fault
• Output programmable from 10.8 – 13.2V
DC
• Remote ON/OFF control of the 12V
DC
output
• Remote sense (up to 0.25V) on the 12V
DC
output
• No minimum load requirements
• Redundant parallel operation
• Active load sharing (single wire)
• Hot pluggable
• Efficiency: typically 90%
• Standby orderable either as 3.3V
DC
or 5V
DC
• Auto recoverable OC & OT protection
• Operating temperature: -10 - 70°C (de-rated above 50°C)
• Digital status & control: I 2 C and PMBus serial bus
• EN/IEC/UL60950-1 2 nd edition; UL 1950, CSA C22.2-950
• CE mark
• EMI: class A FCC docket 20780 part 15, EN55022
• Meets EN6100 immunity and transient standards
• Shock & vibration: NEBS GR-63-CORE, level 3
Applications
•
48V
DC
distributed power architectures
•
Cellular Base Stations
•
Satellite Hubs
•
Network Equipment
•
Network Attached Storage
•
Telecom Access Nodes
•
Routers/Switches
•
Broadband Switches
•
ATE Equipment
Description
The CAR1212DC series of DC-DC Converters provide highly efficient isolated power from DC input mains in a
compact 1U industry standard form factor at a power density of 16.2W/in 3 . These converters complement the
CAR1212FP rectifier providing comprehensive solutions for systems connected either to commercial AC mains,
48/60V
DC
power plants or telecom central offices. This plug and play approach offers significant advantages since
systems can be reconfigured and repositioned readily by simply replacing the power supply. The high-density, front-
to-back airflow is designed for minimal space utilization and is highly expandable for future growth. The industry
standard PMBus compliant I 2 C communications buss offers a full range of control and monitoring capabilities. The
SMBusAlert signal pin alerts customers automatically of any state change within the power supply.
*
UL is a registered trademark of Underwriters Laboratories, Inc.
†
CSA is a registered trademark of Canadian Standards Association.
‡
VDE is a trademark of Verband Deutscher Elektrotechniker e.V.
§ This product is intended for integration into end-user equipment. All CE marking procedures of end-user equipment should be followed. (The CE mark is placed on selected products.)
** ISO is a registered trademark of the International Organization of Standards
+ The PMBus name and logo are registered trademarks of the System Management Interface Forum (SMIF)
RoHS Compliant