Introduction – OSRAM PrevaLED Core Z2 User Manual

Page 7

INTRODUCTION

Combinations of LED modules and ECGs:
For current combination possibilities, please see the
PrevaLED

datasheet at

www.osram.COM/prevaled-core

Within rated power, LED modules and power supplies can
be ﬂ exibly combined, e.g. according to the favored control
option or form factor. A general requirement is that each
LED module is connected to an individual ECG.

The connection between the LED module and the ECG
should be established by means of the supplied cable kit.
Available in lengths 40 cm and 80 cm, please also refer to:

3.2. Wiring information

Well-established form factors have been utilized for the
housings of the ECGs in order to ensure that existing
luminaire housings or accessories can be adopted to
PrevaLED

technology.

1.2.2. Technical data

Technical data product family PrevaLED

Core Z2:

For current data, please see the PrevaLED

datasheet

www.osram.com/prevaled-core

Technical data electronic control gear (ECG):
For current ECG data, please see the OPTOTRONIC

(OTp) datasheet at

www.osram.com/prevaled-core

PrevaLED

Core Z2

ECG (OPTOTRONIC

)

Cable clamp for OTp
This cable clamp can be clamped onto the ECG, turning
it into an ECG suitable for independent installation. It is
available for order for all OPTOTRONIC

OTp 35 and

OTp 45 versions.

1.2.3. Accessories

Cable kit
The cable is required for contacting and connecting the
individual PrevaLED

Core Z2 LED module with the power

supply. It ensures a ﬂ exible and safe connection. This
cable kit is approved according to UL (Underwriters
Laboratories).

PrevaLED

Core Z2-

cable kit 800 lm,

1500 lm, 2000 lm, 3000 lm

PrevaLED

Core Z2-

cable kit 4000 lm

and 5000 lm

1.3. Zhaga – interchangeability of light engines
The Zhaga Consortium for the standardization of LED light
sources (LED light engines) is a worldwide cooperation
of luminaire and lamp manufacturers, producers of LED
modules and companies that supply the lighting industry.
The interchangeability of LED light engines is achieved
by deﬁ ning fundamental interface parameters while still
leaving room for innovation in LED and driver technolo-
gies. Zhaga interface speciﬁ cations cover the physical
dimensions, as well as the photometric, electrical and
thermal properties of different LED light engines.

The Zhaga Consortium was established in February 2010
and includes more than 180 companies (status: April
2012). OSRAM AG is a full member. The members
meet regularly in different regions of the world in order
to jointly work out the speciﬁ cations. Large parts of the
new PrevaLED

Core portfolio fulﬁ ll the Zhaga speciﬁ c a-

tion book 3 for “spotlight systems with separate electronic
control gear.”

An updated list of all currently certiﬁ ed PrevaLED

light

engines is available at:

www.osram.com/zhaga

For more information, please go to: