OSRAM PrevaLED Core Z2 - Manual (Page 24)

24
9
17
19
15
13
12
10
18
16
14
ASSEMBLY IN A REFERENCE LUMINAIRE
6.2. Wiring and refl ector/cover
The corresponding cable kit can be used to connect the
LED module to the power supply. To get the connector
easily into the housing, we recommend a through hole
with a minimum diameter of 10 mm.
Once the LED module is connected, the refl ector can
be attached to the housing and the diffuse cover can be
placed on top of the luminaire.
Both components have to be properly centered above the
LED module.
6.3. Commissioning the PrevaLED ® light engine
After the fi xation of the mounting ring, the optional
decorative ring can be attached.
As an example for an electrical connection within a class II
installation, the two wires for the main connection have to
be connected to the OPTOTRONIC
® power supply.
In a class I installation, the protective earth has to be
connected additionally.
Finally, the complete system can be connected to the
mains and powered up.
11